مميزات خاصة

[Size & Package]: The package includes 1 piece of 1 Meters / 3.28 Ft of high-temperature resistant filament feeder tube and 1 piece of pneumatic connectors. The tube has a 1/4 inches inner diameter and a 3/8 inches outer diameter, with the optimal inner diameter size designed to minimize "wiggle room" or flex. The fitting size is 41 x 18 mm / 1.61 x 0.71 inches, with an inner diameter of 3/8 inches.
Material - The tube hose is made of plastic with good wear resistance and high temperature resistance, ensuring reliable filament feeding and consistent printing results in daily printing environments. The flexible tube is bendable but not easy to deform, providing long-lasting performance for your 3D printing projects.
Stable Filament Feeding & Precise Transmission - The tube adopts ultra-smooth oil-free lubrication material to reduce filament circulation friction, allowing filament to pass through the extruder to the hot end more smoothly, thereby reducing the risk of blockage and the failure rate, achieving stable filament feeding and precise transmission.
Easy to Use: The tube kit contains easy-to-install pneumatic connectors. Just insert the tube to complete the connection: one end is used to connect the tube to the extruder, and the other end is connected to the hot end. These connectors enable quick and safe connections between hoses, 3D printers, and filament dryers.
Wide Application - In addition to being used in 3D printers, the tubes are also widely used in laboratory equipment conduits, guide rails, gas and liquid conveying tubing, electrical insulation at various frequencies, lining pipes, heat exchanger tubing, as well as machinery, electronics, valves, and other uses.

وصف

Description:
Durable Material - The tube hose is made of PTFE plastic material, offering good insulation, wear resistance and high temperature resistance. It is flexible and bendable but not easy to deform, providing long-lasting performance for your projects.
Stable Filament Feeding & Precise Transmission - PTFE tube has a low coefficient of friction and a non-stick surface to reduce circulation friction, allowing filament to pass through to reduce the risk of blockage and the failure rate, achieving stable precise transmission.
Easy to Use - You can cut the hose into different lengths desired, comes with connectors that can be connected. Just insert the tube to complete the connection. Please check the inner and outer diameters of the hose before ordering.
Wide Application - In addition to being used in 3D printers, the tubes are also widely used in laboratory equipment conduits, guide rails, gas and liquid conveying tubing, electrical insulation at various frequencies, lining pipes, heat exchanger tubing, as well as machinery, electronics, valves, and other uses.

Specification:
Tube Length: 1 Meters / 3.28 Feet
Tube Size: 1/4 x 3/8 Inch (ID x OD)
Connector Inner Diameter: 3/8 Inch
Connector Size: 41 x 18 mm / 1.61 x 0.71 (L x W)
Package Content: 1 Piece x PTFE Tubing Hose with 1 Piece x Pneumatic Connectors

مرحبًا،

بحث

خرطوم أنابيب PTFE بطول 3.28 قدم من uxcell، خرطوم طابعة ثلاثي الأبعاد عازل 1/4 بوصة معرف × 3/8 بوصة OD فائق النعومة مع تركيبات هوائية لأنابيب نقل الطابعة ثلاثية الأبعاد، أبيض

مميزات خاصة

وصف

منتجات شبيهه