Thin Section Ball Bearings are designed for applications where space limitations are critical.As the name suggests, these bearings have a minimized difference between the inner and outer diameters of the rings, resulting in a thinner section.This design allows for compact and lightweight assemblies, though it involves some reduction in load capacity compared to standard bearings.Despite their reduced size, thin section bearings can support light radial, thrust, or combined loads.The 6834-2RS is a metric thin section ball bearing with double rubber seals (2RS), offering while retaining lubrication.It has a bore diameter of 170 mm, an outer diameter of 215 mm, and a width of 22 mm.The bearing is made from 52100 steel and is pre-lubricated with grease.It features ABEC-1 and standard internal clearance (C0).This model belongs to the 6800 series, which is intended for limited space applications with light loads.Thin section bearings like this one significantly reduce the required installation space—up to about one-third less than the commonly used 6000 series bearings.Their small sectional area also contributes to lower running torque.Available in various sealing configurations, including shielded, open, and sealed types, these bearings offer flexibility in mounting and lubrication options.The 6700 series, for example, features low-friction seals for enhanced efficiency.Other series include the 6700 for very light loads and minimal space, the 6900 for heavier loads within constrained dimensions, and the 63800 series, which combines the load capacity of the 6800 series with the narrower width of the 6900 series.