[Fitment]:7912-II, 7916-II, 7920-II, 8012-II, FA 79D, HF 80D, DC82 25-32, DC82 35-41, FA 76D, FA 78 25-32, FA 72D, 8500-IV Series, 8500-III Series, 85-II Series, 85-I Series, 8900-I DC Series, 8900-II DC Series, 8900-III DC Series, AFSD12, AFSD16, AFSD20, AFMD20, AFMD25, AFMD30, AFMD35, DFMD20111,DFMD25111,DFMD30111,DFMD35111,DFSD12111,DFSD16111,DFSD20111.
[Not compatible]: The FAN50 Plus control board should not be used for 900 series furnaces with thermostats in the grounding circuit.
[Function]: This board can be used to upgrade old furnaces and add fan control functionality. The FAN50 Plus control igniter board is designed to turn off the fan motor when the igniter board fails to detect flames after three ignition attempts. This can reduce battery consumption and avoid unnecessary cold air blowing.
[Installation]: After turning off the fan motor, the fan 50 Plus pin will wait for 1 hour and then repeat the entire sequence again before permanently turning off.
[Attention]: The Fan Control function must be used to operate this board correctly.
وصف
Specification:
Power Connector Type:6-Pin
Voltage:12 Volts
Wattage:50 watts
Cooling Method:Air
Noise Level:50 dB
Material:Alloy Steel, Aluminum
Maximum Rotational Speed:1500 RPM
Flame Failure Response Time:0.8 seconds maximum
Tries for lgnition: Three
Operating Temperature: -40 to + 176°F(-40℃ to +80℃).