Four Wing Slotting Cutters
End Mill
In order to get good cutting performance and service life it is necessary to use high precision and high rigidity tool holder。
1.Before using the tool please measure the tool deflection. When the tool deflection accuracy exceeds 0.01mm the feed speed or cutting amount will be increased.
2. The shorter the tool extends out of the chuck the better. When the tool extends out for a long time please reduce the speed feed speed or cutting amount.
3. In case of abnormal movement or sound during cutting please reduce the spindle speed and cutting amount until the situation is improved.
4. Steel cooling is a good way of spraying or air injection to make high titanium aluminum perform very well and no water-soluble cutting fluid is recommended for stainless steel titanium alloy or heat-resistant alloy.
5. The cutting mode depends on the influence of workpiece machine and software. The above data are for reference only. When the cutting condition is stable increase the feed speed by 30% - 50%.
Different hardness and different coating
Dear customers
The estimated delivery time for our products is 7 to 21 days.
If you have not received your order within 30 days please contact our customer service.
If you have any questions please contact us we will reply you within 24 hours very
Your satisfaction makes us the last wish I wish you a happy shopping