Name: معادل رسومي ذو 9 نطاقات، معادل استيريو، تعديل عالي ومتوسط وباس، مع مرشح منخفض القطع/إضاءة شاشة LED/تقنية الكشف عن ردود الفعل، للترفيه بالموسيقى
Brand: THYXGS
Availability: InStock

مميزات خاصة

【9-band graphic equalizer】: With its nine frequency bands, you can easily fine-tune the sound and eliminate feedback instantly. Each fader can be used to increase or decrease the frequency range it controls by up to 12DB, an ultra-compact graphic equalizer for studio and stage.
【High, medium and bass adjustment】: The green light represents normal signal, the yellow light represents the signal close to saturation, and the red light represents sound overload. Raising and lowering specific frequency bands can improve the frequency response of any room acoustics.
【Low-cut filter】: The graphic equalizer also has a low-cut filter for eliminating unwanted low frequencies such as floor rumble, room resonance, electronic hum, etc.
【Feedback detection technology】: When the frequency band approaches the danger zone, the LED on each fader will light up. All you need to do is lower the glowing slider until the LED flashes - voila, feedback problem solved!
【LED display light】: Precise 6-segment LED input/output meter and level control for precise level indication.

وصف

Welcome to "THYXGS"!

Product Specifications:
Product Name: 9-band Graphic EQ Equalizer

Input
Type: 6.3 mm stereo jack (balanced) or RCA jack (unbalanced)
Impedance: Approx. 20 kOhm (balanced) Approx. 10 kOhm (unbalanced)
Common Mode Rejection Rate: 40 dB at 1 kHz
Maximum Input Level: +15 dBu

Output
Type: 6.3 mm jack (unbalanced) or RCA jack (unbalanced)
Impedance: Approx. 120 ohms
Maximum Output Level: +15 dBu
Frequency Response: -3 dB from 10 Hz to 200 kHz
Dynamic Range: 110 dB from 10 Hz to 22 kHz
Harmonic Distortion: 0.003% at 0 dBu
Crosstalk: Signal to Noise Ratio:
Type: Analog Stereo 9-band
Control Range: +/-6 dB or +/-12 dB, selectable
Bandwidth: 1 octave
Low-cut filter: 75 Hz (12 dB/octave)
Input level control: -12 dB to +12 dB
Power connection: Power adapter

Packing list:
Host*1