[Heating and cooling]: The dry bath incubator has two modes: heating and cooling, and has a temperature deviation calibration function. The temperature control accuracy is ±0.5°C, and the display accuracy is ±0.1°C
[4 modules available]: Suitable for 0.2/0.5/1.5/2ml centrifuge tubes. Different modules can be selected according to experimental needs. With intuitive LED real-time temperature digital display
[Multi-point operation]: You can set up to 9 sets of circulation time and temperature. You can directly call the stored program. After running one program, it will automatically jump to the next program until all programs are completed
[Smart algorithm]: Built-in over-temperature safety device provides better safety for your experiments; fault detection and buzzing alarm. When the laboratory dry bath fails, the corresponding fault code will be displayed and the buzzer will sound
[Application]: Constant temperature water bath is widely used for drying, concentration, distillation and impregnation of chemical reagents. It is a general laboratory equipment with heating and cooling devices
Describe:
Dual-purpose machine, heating and cooling modes are optional, and the function is more powerful.
Note: Do not touch the metal bath module with bare hands before the metal bath cools down to prevent injury.
Specification:
Temperature range: room temperature -15~100°C
Temperature stability: ±0.5°C
Display accuracy: 0.1°C
Heating time: Refrigeration time: 20-25min (20-0°C)
Multi-point operation: Yes (1-9 segments)
Timing range: 5s-23h59min
Power: 60W
Module size: 71x47x32 mm
Product size: 160x115x96 mm