Specification:
Item name: propeller puller/extractor/prop removal tool
Diameter of the metal pin: about 0.77mm
Size: 98x59.8mm (3.86x2.35inch)
Weight: about 46g/set

Material:
1. Main body structure: 304 stainless steel (corrosion-resistant and high-strength)
2. Core components: nitrided steel, heat treatment（wear-resistant and prolong service life）
3. Handle: PLA+ABS (anti-slip and impact-resistant)

Application:
1.Suitable for motor shaft with a diameter of 0.8mm-1.5mm
2.Suitable for 2-blade propeller/3-blade propeller/4-blade propeller
3.Suitable for 1S 2S FPV racing drone, such as BetaFPV Air65/Air75, Meteor85, Meteor75 Pro and Mobula7

Features:
1.No iron sheet design: directly pull without requiring gaps in the propeller blades, avoiding damage to the motor caused by traditional propeller pullers.
2.Simple operation: rope-pulling structure enables easy removal of propeller blades and reduces operation time.
3.Safety protection: uniform force application, no contact with the motor, protecting the motor shaft from impact.
4.Replaceable rope head. Convenient for removing different propellers.

Propeller removal tips:
1.Rotate the pull rope to ensure uniform force application.
2.Try to pull the root of the propeller blade, then reduce damage to the propeller blades.

Note:
1.There will be a little white mark left on the replacement rope head due to the overflow of reinforcing glue, which can be cleaned by wiping with cleaning water.
2.When replacing the rope head, simply screw it to the appropriate position; no need additional tightening. (Over-tightening may damage the threads)
3.Please be aware that in extreme cases, it may cause slight indentations on the propeller blades. (Have no impact on flight performance)
4.Size is manual measurement, there are exist errors.
5.The drone, propeller, motor and others in picture shown will not include.

Package include:
1set x propeller puller