Simpler Works: The multiplexer is at I2C address 0x70, which can be adjusted from 0x70 to 0x77, you just write a single byte with the desired multiplexed output number to that port, and bam any future I2C data packets will be sent to this port.
Great Control: You can use 8 of these multiplexers at each 0x70‑0x77 address in order to control 64 identical I2C addressing sections.
Wide Matching: Compatible with 3V and 5V, so you can use it with any logic level, very practical, and efficient.
Practical Use: Connect up to 8 I2C devices of the same address to a micro controller and route commands to a selected set of I2C pins.
Easy to Install: Comes with 5 sets, and each set has 2pcs pin header, can also be plugged into a solderless breadboard.
وصف
Specification:
Item Type: Development Board
Supply Voltage: 1.65V to 5.5V.
IIC Address: 0x70 - 0x77
Frequency: 0 to 400kHz.
Channel: 1 to 8 channels.
Resetting: Power on reset.
How to Use:
The multiplexer itself is at I2C address 0x70 (but can be adjusted from 0x70 to 0x77), you just write a single byte with the desired multiplexed output number to that port, and bam, any future I2C data packets will be sent to this port. Theoretically, you could use 8 of these multiplexers at each 0x70‑0x77 address in order to control 64 identical I2C addressing sections.
Package List:
5 x Development Board
10 x Pin Header