Specification
Color: Clear
Flask Capacity: 500ml/16.9OZ
Assembly Required: Yes
Material: High Borosilicate Glass, Iron, Rubber, Latex
Conical Flask, Funnel, and Beaker Capacity: 100ml/3.38OZ
High-temperature Resistant: Less Than 350℃/662℉
Gross Weight: 3.2kg/7lbs
Net Weight: 2.8kg/6.2lbs
Latex Pipe Length: 1.5m/5FT
Package Size: 43.5*32*22.5cm/17.13*12.6*6.35in

Package Included
1*Serpentine Condenser Tube
1*Pear Shaped Dispensing Funnel
1*Thermometer
1*Cow Horn Tube
1*Beaker
1*Conical Flask
1*Glass Dropper
1*Distillation Flask
1*Iron Stand
2*Essential Oil Bottles
1*Alcohol Lamp
1*Brush
All Accessories Needed for Installation

Notes
1. Before using the product, please fix the base of the iron stand with nuts, then adjust the position of the ten stand and iron clamps, and connect the distillation flask and the condenser tube.
2. The position of the sink should be higher than the plane of the condenser pipe, and then inject about 30ml water from the water inlet pipe with a syringe inside the condenser pipe.
3. Connect the latex tube conduit, and loosen the outlet latex tube stop clip, the water will automatically flow out (siphon phenomenon principle).
4. Please note that the position of the mercury ball in the thermometer should be at the same level as the bottom of the nozzle, and the liquid in the distillation bottle should not exceed 2/3 volume or be less than 1/3 volume.
5. The heating temperature shall not exceed the boiling point of the highest material of the mixture.