Condition:
Typical Flow Rate in CC per minute: 550 CC/min @ 43.5 PSI
Typical Flow Rate in LB per hour: 48 LBS/HR @ 43.5 PSI
Resistance: 12 ohms (High Impedance, High Resistance)
Voltage: 8-15 Volts, nominal 13.5 Volts
These High Resistance(Approx. 12 OHMS) Saturated fuel injectors will fit many applications, including, but not limited to:
for 1986-1991 Compatible For Acura Integra (Must remove OEM resistor box, may need clips)
for 1992-2001 Compatible For Acura Integra (1996+ REQUIRED Clips )
for 1988-1997 Compatible For Honda Accord 4 Cylinder Engines (Must remove OEM resistor box, may need clips)
for 1998-2002 Compatible For Honda Accord 4 Cylinder Engines (REQUIRED Clips )
for 1988-1991 Compatible For Honda Civic (Must remove OEM resistor box)
for 1992-2000 Compatible For Honda Civic (1996+ REQUIRED Clips )
for 1988-1991 Compatible For Honda CRX (Must remove OEM resistor box)
for 1992-1995 Compatible For Honda Del Sol
for 1992-1996 Compatible For Honda Prelude (Must remove OEM resistor box)
for 1997-2001 Compatible For Honda Prelude (1997+ REQUIRED Clips )
Any OBD 0, OBD 1, B-Series, D-Series or H-Series Engine
You can always run these high resistance injectors, even in a low resistance setup.
Amperage: 1.0 Amps
Pressure: Min 30 PSIG / Max 100 PSIG
Spacers/O-rings Included: YES, on the injectors
Electrical connector type: EV1 (Minitimer, Jetronic)
Overall Length: 3 inches, 76 mm
Top O-ring: 11 mm
Colour:As shown
Material:Plastic + Metal
Package Contents:
4 x Fuel Injector
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Welcome to our shop, which sells auto parts. The products are all customized, and the quality is very good. Please feel free to buy them if you have any needs. Thank you.