CAR BRAKE BLEEDER KIT TO HELP YOUR BRAKE SYSTEM BLEED EFFICIENTLY

Product Attributes
Colors: Transparent
Sizes:
Hose 1: Length: 13.98 inch, OD: 0.32 inch, ID: 0.19 inch
Hose 2: Length: 5.91 inch, OD: 0.24 inch, ID: 0.16 inch
One-way Check Valve: 2.09*0.5*0.5 inch
Weight: 5.2 oz
Material: PVC, Aluminum Alloy, Rubber
Packaging: Brake Bleeder Cap*6, Clamp*6, One-way Check Valve*2, Hose*4

Procedure for Use
1. Detach the protective cover of the drain valve and connect the hose side to the drain valve connector tightly to check that the hose is securely connected
2. Locate the oil filler cap and unscrew the cap screws
3. Use a suitable tool to slowly loosen the oil drain screw. At this point, the old brake fluid will slowly flow out of the hose
4. Add new standardized brake fluid to the inside, at the same time, squeeze the brake by hand, the fluid level should be higher than the drain port, this is the core point to avoid air entering the brake line
5. Repeat the fourth step above until you see that the fluid coming out of the hose has the clear color of new fluid and there are no air bubbles, indicating that the old fluid in the system has been completely replaced, you can stop the cycle action
6. Use the screws to re-tighten the oil cap

Product Functions & Features
1. The car brake bleeder hose is transparent design, in the process of brake bleeding can smoothly guide the flow of brake fluid to avoid spillage and splashing, and the situation inside the hose can be seen at a glance
2. The brake bleeder caps in the car brake bleeder tool protect the bleeder screws and can be tightly fitted after the bleeding process is completed to realize a dust-proof seal
3. The clamps in the car brake bleeder one way valve hose kit are indispensable during the bleeder process, holding the hose firmly in place at the connection and avoiding loosening during handling due to vibration or pressure changes