6000# 6 hole Idler Hub Assembly
Includes Hub, New Bearings, Nuts, and Rim Clamps
This unit fits the #42 axle Spindle used on most Mobile Home axles, and 5200#, 6000# and 7000# trailer axles.
Bolt Pattern of 6 on 5 1/2" -6x5.5"-
Includes:
One New 6 lug hub
One NEW 25580 Inner Bearing -1.75" ID-
One NEW 15123 Outer Bearing -1.25" ID-
One New 2.125" ID Seal
Note: Not All Mobile Home Axles Are The Same, Please Verify Your Bearing Sizes that you have -1-1/4" outer ID, 1-3/4" inner ID- Must have a 25580 Inner Bearing Before Purchasing for a mobile home axle.
Measure to make sure your spindle size. You need a 1.25" outer bearing, and 1.75" inner bearing. Seal size can be either 2.25" or 2.125". we send both, use the size you need.
Also, this has never been a issue, but people have asked. The normal spindle length from the shoulder the inner bearing pushes against, to the end of the spindle should be about 4-1/4 or more. When installed in the hub, the bearings are about 3-5/8" outside to outside.
Bolt Pattern, on this hub is the 6 on 5.5" bolt . That is on many 6 hole pick up trucks, and all 6 hole trailers. The "Center Hole" part of this hub is very close to 3-1/2" so if you buy used truck wheels, they need a center hole 3-1/2" or larger.
These are NEW hubs, made by , , , Quailty, etc.
Some will be be NEW "Take " hubs -we installed brake hubs on a new axle, and these hubs came the new axle-
Pictures shows "typical" hub, brand varies: