This EP26-style electronic flasher relay is a plug-in replacement module used to control turn signal and hazard warning flash rate. Always confirm fitment by the OE number on your original part and by your vehicle manual/service diagram.
Type: Electronic flasher relay module (turn signal / hazard warning)
Electrical: 12V, 167W (approx. 13.5A max load)
Terminals: 4-terminal plug-in configuration
Load rating: 2-turn / 6-hazard
Features: Integrated-circuit controlled operation; built-in lamp outage indicator (where supported)
Reference: EP26; common interchange refs include EF26 / FSH7126 / FLR726 / EFL3 (verify by markings)
Turn signals or hazards stop flashing, flash intermittently, or do not work at all
Abnormal flash rate due to bulb-out condition, poor socket contact, or an aging flasher module
Disconnect the negative battery cable before replacement.
Flasher modules are commonly found under the steering column / dash area or in the interior fuse/relay panel—confirm the exact location in your manual.
Match the 4-terminal layout and seat the module fully; do not force misaligned pins.
After installation, test left/right turn signals and hazards; re-check bulbs and fuses if issues remain.
Fitment reminder: Do not rely on appearance alone. Confirm by OE number (EP26) and by your vehicle's fuse/relay chart or service information.