Want to enhance your vehicle's clutch performance by replacing the worn clutch arm? Install this CClutch Release Adjusting Lever for 06-00715 Clutch Arm, Replaces OEM Peterbilt 06-00910M014, Automann 755.CCL102, AM755CCL102, IATCO M-2066, Paccar Parts PTR0600910M014 . Find more information about this clutch arm below:
Size: This cross shaft lever is manufactured with a length of 8 inches and a diameter of 0.875 inches, providing the precise mechanical leverage needed for smooth clutch actuation.
Application: The lever transfers motion from the cross shaft to the clutch release mechanism, ensuring accurate disengagement and engagement of the clutch during operation.
Compatibility: Compatible with the following OEM brands and part numbers:
Fits Peterbilt: 06-00715, 06-00715-2, CP0600715
Fits Automann: 755.CSL101, AM755CSL101
Fits BWP: M2028
Fits Paccar Parts: PTR0600715
Safety Points to Consider:
Confirm correct installation with bushings to avoid binding or misalignment.
Inspect the mating clutch components (fork, shaft, bushings) for wear before replacement.
Secure the lever with the appropriate pins or fasteners to avoid slippage during use.
Avoid using excessive grease; it can attract debris and cause premature wear.
After installation, test manually for a full, smooth range of motion.
Installation Instructions:
Slide the lever onto the clutch cross shaft in alignment with the housing.
Connect to the clutch release fork or mechanism using the recommended pin/bolt.
Ensure all bushings and brackets are in place and free of play.
Check for correct fitment with parts before final assembly.
When to Replace the Old Clutch Lever of Your Vehicle:
If the lever shows signs of bending, cracking, or unusual wear.
When the clutch is not disengaging cleanly or has an inconsistent pedal feel.
During a clutch system rebuild or when replacing the shaft or fork.
If existing bushings are worn, causing loose or erratic motion.