Acid Tactical Easy Peel Adhesive Stencils

ASSORTED Skull Clusters - Easy Peel - Stick on, Paint, Peel Off

9x14" Sheets - Read product description for full details.

2 stencils as shown in our main image.

Designed for use on Rifles, Shotguns, RC Cars, Models, & More. Can be used on Plastic, Metal, Wood, etc..

.25mm Vinyl Sheets - Peel off, stick on Stencils)

Can be used with all types of paints including, Rattle can, Duracoat, Cerakote, water, and oil based paints.

Acid Tactical ADHESIVE stencils. Our stencils will not leave sticky glue residue behind. They were designed to remove cleanly and not effect the paint.

For use with airbrush, spray, gun coatings, duracoat, cerakote, and other spray paints.

Stencils are heat resistant on both metal and polymers. They do not shrink on ABS and Polymers when flash curing. They leave little to no adhesive behind so no messy clean up.

What you get.

2 - 9x14" Sheets - Same skull design

Specifications:

Material: High Temp Vinyl film
Thickness: .25mm
Length: 14"
Width: 9"

Optimal temperature for application is 65 deg F to 110 deg F. Humidity will affect application. Store sheets in a cool dry location. High humidity will cause the sheets to curl.

Useful Tools:

Exacto knife - Can be used to remove sticker and also to form sticker in tight angles. Scissors - To trim excess stencil

STENCILING STEPS:

1. Basecoat your project with a good camouflage color.
2. Clean off the project to remove any dust or paint residue. Be sure to have clean hands and refrain from touching the adhesive side during application.
3. Apply the stickers to your project. Using a sharp edge such as an exacto knife or razor blade.
4. Avoid leaving small pieces bending around corners. May not adhere well.