مميزات خاصة

True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service.

وصف

Feature
Display: liquid crystal display (LCD)
Maximum display: 5999 (3 5/6) bit automatic polarity display
Measurement method: double integral A/D conversion
Sampling rate: about 3 times per second
Overrange display: The highest position shows"OL"
Low voltage display:"Low voltage symbol "symbol appears
Working environment:(0~40)°,relative humidity Power: AAA 1.5V battery(not incluida)

Package:
1* instruction manual
1* certificate, one leather cas
1* pair of test leads
1* temperature probe

NOTE:
1. When measuring voltage, please do not input the limit voltage exceeding the effective value of DC 1000V or AC 750V
2.The voltage below 2.36V is a safe voltage. When measuring higher than 36V DC and 25V AC voltage, check whether the test leads are in reliable contact, are connected correctly, and are well insulated to avoid electric shock
3. When changing functions and ranges, the test leads should leave the test point.

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه