This Is A hardware set for Stock Axial 30 from Hot Racing
FEATURES:
Steel Constraction screw and Nut
YOU WILL RECEIVE:
Screw and nut total 100 pieces
RH M1.4 x 5mm, Hex stainless Five (5)
RH M1.4 x 8mm, Hex stainless Eight (8)
RH M1.4 x 12mm, Hex stainless Six (6)
RH M1 X 4mm Philips black oxide Twenty-eight (28)
RH M1 X 6mm Philips black oxide Twenty-nine (29)
RH M1 X 8mm Philips black oxide Sixteen (16)
FH M2 X 5mm Hex Black oxide Four (4)
LN M2 Lock Nut stainless Steel Four (4)
REQUIREMENTS:
For Round Head M1.4 Screw
Use 1.27mm or 0.05 Hex wrench
For Round Head Philips Head M1
use PH00 Philips head
For M2 Motor Screw
Use 1.5mm Hex wrench
For M2 Lock Nut
Use 4MM driver

WORKS WITH:
- Fits Axial 1:30 SCX30 Crawler