PAIR OF 2 KEYS: This listing is for a pair (2) of brand-new replacement keys, precision cut by code 3106 on the YH38 key blank for Kawasaki, Yamaha locks/ignitions using the 3101–3150 code series on this keyway. These are code-cut keys made to factory spacing and depth—not copies traced from an existing worn key—so you get a clean, consistent key even when an old key is rounded off, bent, or was duplicated poorly. Common applications include motorcycle and powersports ignitions, helmet and seat locks, fuel caps, saddlebags and trunk/pannier locks, glove boxes and storage compartments, and on-water equipment such as outboard or PWC ignitions, boat helm/console locks, and marine compartment locks where this keyway is used; the same profile is also encountered on some utility equipment and golf cart/boat accessory locks that share the YH38/X77-style keyway. Typical settings include garages and workshops, marinas and boat docks, storage yards, and trailer setups where having a spare pair helps prevent lockouts for family members, riders, guests, or service techs. To ensure proper fit, your lock (or the face of the ignition/lock cylinder) must be clearly stamped with code 3106 and must use the matching YH38 keyway—codes are not universal across different key profiles. If your hardware has been replaced, re-keyed, or swapped to a different code, the stamped number may not match what currently operates it. For best results, confirm the cylinder turns smoothly and use an appropriate lubricant; damaged or corroded cylinders can prevent any correctly cut key from turning. Cross-reference note: this keyway is commonly referenced as Ilco X77, Ilco EZ YH38, Curtis YM-42, Jet YH38, JMA YAMA-12D, Silca YH8R, Dominion YH38, Orion YM17L, Taylor X77, Original/OEM 1211 (for identification only; the full list is provided in the bullets). Manufactured by The Lock Doctor LLC under the KEYSALACARTE brand.