Programmable Logic Circuits
Specifications
Model Number
FCT-201-F
Product Function Description
Transmit 1 channel RS232/422/485 serial port on Ethernet, industrial rail type
Service Port Description
1*RS232/422/485 serial terminal interface, 1*DB9 male port, 1*Fast Ethernet port
Power Supply
DC power supply:
Overload protection: support; reverse polarity protection: support; redundancy protection: support
Access terminal: 4-core 5.08mm pitch plug-in terminal
AC built-in power supply:
Overload protection: support;
Access interface: AC Cross style sockets
Product Size
(110mm(L) x 86mm(W) x 40.5mm(H)
Installation method: rail installation, wall-mounted installation
Weight
0.495KG/PCS
Application
Features
Adopt ARM Cortex-M4, primary frequency 192MHz processor;
Support 1 channel Fast Ethernet; Ethernet supports 10/100Base-T(X) adaptive Ethernet interface; supports auto-negotiation (Auto-Nego Full&half duplex supports automatic crosswire detection MDIMDIX;
Provide 1channel RS232/422/485 serial port, support 300bps-921600bps line speed non-blocking communication, support automatic baud rate scan matching and customer-defined baud rate;
The serial data interface conforms to the relevant standards of RS-232/RS-485/RS-485. There are three kinds of interfaces, and different bus modes can be set by dialing the code;
Serial interface supports optical fiber interface, supports 1310nm single mode, 1310nm multimode, 850nm multimode, ST/FC/SC optional;
Support Modbus , Server, Client, UDP Server, UDP Client, and other working modes;
Complete the transparent conversion from Modbus-RTU to Modbus-TCP, and realize the loading of serial device data through the network;
Support serial port status and serial port parameter monitoring, the communication status is clear at a glance;
Support cross-gateway and cross-route communication; support virtual serial port drive access mode and automatic connection recovery function after network interruption;
Flexible serial port data framing settings to meet various subcontracting needs of users;
Support standard TCP/IP SOCKET application access, supports multi-connection, to meet the requirements of less than 4 users to monitor or manage serial devices at the same time;
In UDP mode, it supports single-machine or multi-machine communication, which can satisfy multiple users to monitor or manage serial devices at the same time;
Support Windows configuration tool, serial port and WEB, and other configuration forms, support SNMP network management;
Support local and remote system firmware upgrades;
When dual DC power supply (5.08 terminal block):
* It can be powered by DC9-55V or AC7-50V wide-range power supply, the power supply has the function of automatic polarity detection, and there is no need to distinguish between positive and negative poles during installation;
*Support internal isolation, redundant dual power input; anti-reverse protection
When AC power supply (Cross style AC sockets):
Support AC~85-265V AC or DC110-300V DC wide-range input
The power supply supports overload protection; it meets the requirements of industrial four-level electromagnetic compatibility; super protection function: protection, anti-induced high voltage, anti-surge, etc.;
No fan for efficient heat dissipation, reducing repair time;
Anodized aluminum alloy shell, IP40 protection grade, can withstand the test of harsh environments;
Rail or wall mounting;
Wide temperature type: working temperature -40 +85;
All models are 100% oven-tested;
Parameters
Serial Interface Standard
EIA/TIA-232 RS-232 (ITU-T V.28)
EIA/TIA-422 RS-422 (ITU-T V.11)
EIA/TIA-485 RS-485 (ISO/IEC8284)
Serial interface:
RS-422: TxD+ TxD- RxD+ RxD-
RS-485 4 wires: TxD+ TxD- RxD+ RxD-
RS-485 2 wires: A(TX+) B(TX-) Ground
RS-232:
Terminal: RXD TXD GND
DB9 (male): RXD TXD GND, CTS, RTS
Ethernet interface(10/100M) Agreement: IEEE 802.3, IEEE 802.1q (VLAN)
Speed rate: 10/100m self-adaptive, full/half duplex fully self-adaptive
address table: can learn 4096 addresses
Physical interface: RJ45, support Auto-MDIX Working Environment Working Temperature: -40 - +85
Storage Temperature: -40 +85
Working Humidity: 0% - 95% (no condensation)
MTBF: > 100,000 hours
==========
Model Number : FCT-201-F
Type : Other
Network : Wired LAN
Product name : 1 channe RS232/422/485 to ethernet converter
Weight : 0.3
Power supply : AC/DC
Size : 93*70*25mm(WXDXH)
Working Humidity : 0%~95 %
Working temperature : -40°C-85°C
serial : RS232 RS422 RS485
Power consumption :