How to Use:
1. Install a CR2032 battery on the tester, and test each memory slot of the corresponding DDR2 and DDR3 motherboards respectively. The motherboard does not need to be powered on. Press the switch on the tester. The test lights are all on and the brightness is consistent, indicating that the signal line is normal. If the light does not light up or is very bright, it means that the signal has an open circuit and short circuit fault.
2. When testing the DDR2 motherboard, there is no pull up exclusion on the address line, all indicators are on, which means normal. Table to further determine whether the address line of the BGA is open.

Specification:
Item Type: Computer Memory Tester
Material: PCB
Battery Type: CR2032 (delivered without battery)
Applicable: Motherboards That Support All DDR2 and DDR3 Interfaces

Package List:
1 x Computer Memory Tester
1 x User Manual

Note:
When testing the motherboard for inte, the motherboard can be measured without inserting the CPU and various connection cards
When testing for AMD motherboard, the test light will be on when the CPU is plugged in
Shipped Without Battery