GAF-12v12w: A Gigabit, Mode A/B Inline PoE Splitter for 12 volt devices like IP Cameras, Media Players, and Speakers. Instantly convert IEEE 802.3af PoE to 12 volts for non-PoE devices. The 5.5mm x 2.1mm barrel fits most 12-volt devices. 12v splitter works with 802.3af PoE (Power over Ethernet) to provide 12 watts of continuous 12 volt power. Use with your existing PoE Switch or 48v PoE Injector to power 12 volt non-PoE devices such as outdoor cameras. Use with any 802.3af PoE switch like Cisco or Netgear with 10/100 or Gigabit speeds. Compatible with Arduino, Foscam, Wansview, Airsight, EasyN, Escam, Q-See, Apexis, Wanscam and other non-PoE devices. (For the Roku Ultra, see our GAT-12v25w splitter) A PoE power splitter that converts and 'splits' 44-56 volts of PoE into 12 volts of power on the DC barrel, along with divided 10/100/1000 Gigabit data on the RJ45 connector. Now you can safely extend DC power up to 328 feet away from a power source. GPOE-1A: Instantly add PoE to your network switch or router. This small, compact mountable PoE injector screws into the wall near an outlet or to the underside of desks, reducing clutter and offering versatility for your setup. Power IP security cameras, VoIP desktop phones, WiFi access points, and other devices that accept passive 802.3af using a data network cable and this passive Power over Ethernet adapter / single port injector. This midspan injector includes a UL certified 48 volt, 15 watt DC power supply to power devices labeled ‘802.3af'. Delivers power up to 328 ft from the injector site. Compatible PoE devices must have a wattage of 15w or less. Plug and play. Our single port PoE adapter transmits 10/100/1000 Gigabit data, delivering lightning fast wired speeds with no loss of signal quality via one Data In port and one Data + Power Out port.