3.5mm-SL2 for Leica camera shutter cable
1）Applicable cameras: for leica SL2,SL2S,SL3,SL3S
2）Supported functions: Focusing, taking photos
3）Port specification: TRS3.5 - TRRS3.5 gold-plated plug
4）Packaging List (two cables in total) : 1 3.5mm-SL2 straight 13.8-inch cable + 3.5mm-SL2 spring wire, straightened 59 inches, 1 piece
5） Applicable devices: Applicable to all wireless shutter remote controls, shutter cable remote controls/flash triggers of cameras with shutter jacks available on the market. Due to the differences among various brands, there are basically two types of jacks: 2.5mm and 3.5mm. When purchasing connection cables, users should first measure the size of the jacks on their remote controls before making a purchase. The 3.5mm plug is the same size as the plug of the mobile phone headphone cable or the microphone port of the computer.
6）2.5mm and 3.5mm refer to the diameter of the camera remote control plug, which is suitable for connection and use with all brands of shutter remote controls on the market
7） Line length:
7-11) For the straight line type, it is approximately 35cm/13.8 inches
7-2) The spring wire model is usually placed at 30cm/13.8 inches, and when stretched, it becomes 140cm/55 inches long
8: Installation process
8-1: Install the camera plug to the bottom. Rotate it once to ensure good contact of the contacts. Rotate and press the TRRS3.5 plug to the bottom to enable normal communication (as it is relatively tight, a certain amount of force is required).
8-2: No Settings are required. Just connect the remote control to the 3.5mm on the other end to directly control the shutter