مميزات خاصة

Metric/Inch Thread Switch: The metal lathe can automatically switch between metric and inch systems just through the control panel without the need of changing gears. The spindle rotation speed is divided into two adjustable gears: 50-1250 rpm and 1250-2500rpm
Self-acting Feed: The metal lathe can make automatic feed in the X axis direction instead of manual feeding. The feed speed can be set through the control panel and the feed range can reach 0.01mm-0.4mm
High Processing Accuracy: The benchtop lathe is equipped with two chucks on the left side, with the concentricity of 0.03-0.05mm, which can process longer objects. The processing accuracy is high especially for shaft and pipe part. The tailstock is movable and fixable with a maximum center distance of 31.5" at the far right. The lathe can make accurate operation by adjusting set screws, with the MT#2 taper in tailstock spindle
Reliable Design: Above the lathe is designed with the forward and reverse switch, start and emergency stop switch. Users can immediately cut off the power supply in case of emergency, ensuring the operation reliability
Wide Application: The metal lathe can be used for turning end face, internal and external thread, Buddha beads, as well as drilling, chamfering, cutting and other processing, which can meet most of your DIY processing needs

وصف

Product Parameters
Model: RC-210E
Voltage: AC110V 50/60Hz(Brushless Motor)
Power: 1100W(1.5HP)
Length of center: 31.50"(800mm)
Swing Over Bed: 8.27"(210mm)
Concentricity tolerance: 0.03mm-0.05mm
Rotary diameter of tool rest: 5.51"(140mm)
Spindle bore: Right side: 1.50"(38mm) Left side: 1.26"(32mm)
Max clamping diameter of right chuck: 4.92"(125mm)
Max clamping diameter of left chuck: 3.54"(90mm)
Width of lathe bed: 3.94"(100mm)
Thread standard: Metric/imperial/customized
Turning delay start time: 1s-30s
Number of Spindle Speeds: Infinitely variable speeds
Range of Inch Threads: 10-44T.P.I
Range of metric threads: 0.5mm-3mm
Spindle taper: MT5
Knife rest labour: Horizontal four-station
Spindle rotation speed: 50-2500rpm
Precision of the spindle: 0.01mm
Automatic feed range: 0.01mm-0.4mm
Tail frame taper: MT2
Maximum stroke of tool rest plate: 2.16"(55mm)
Maximum stroke of middle plate: 2.95"(75mm)
Maximum stroke of bottom plate: 26.77"(680mm)
Maximum stroke of tailstock sleeve: 2.36"(60mm)
Package size: 55.1"*18.5"*20.1"(140cm*47cm*51cm)
Net weight/Gross weight: 178.5LB(81kg)/220.5LB(100kg)

مرحبًا،

بحث

مخرطة معدنية دقيقة مخرطة معدنية مترية/بوصة مع محرك بدون فرشاة 1100 وات وظرف مزدوج 8 بوصة × 32 بوصة 50-2500 دورة في الدقيقة 110 فولت

مميزات خاصة

وصف

منتجات شبيهه