Extra Wide And Extra Strong Door Rain Drip Caps: Different From All Other Brands Of Door Rain Drip Cap Guard, Our ZEYUE Door Drip Caps Are Designed With Extra Wide And Extra Thick Aluminum, With A Width Of 5.12 Inches/13 cm And A Maximum Thickness Of 2.5 mm. The Width Of Other Brands is 2.5"/2.7"/2.8", Which Is Wider And Stronger Than All Other Exterior Door And Window Rain Drip Guard, Exterior Door Water Guides And Rainwater Deflectors, Which Can Bring Better Rain Splash Protection.
Door Rain Drip Guard Material: The Overhead Door Rain Drip Guard Is Made Of High-Quality Anodized Aluminum, Which Has Good Corrosion And Rust Resistance. It Will Not Rust After Long-Term Use And Is Durable. The New Curling Edge Design Allows Rainwater To Flow Down The Sides Of The Rain Drip Guard To Prevent It From Dripping On People.
Application Scenario: The Over Door Rain Drip Guard Is Mainly Used On The Top Of The Exterior Doors And Windows Of Residential And Store Houses. To Prevent Rainwater From Entering The Interior Of The Doors And Windows Along The Edges Of The Doors And Windows, And Prevent The Threshold From Rotting.
Packaging: Each Rain Drip Guard Is Equipped With 6 Screws And 6 Expansion Bolts. There Is No Need To Purchase Additional Screws And Expansion Bolts, Which Saves You Time.
Installation: We Have Reserved 6 Screw Holes Above The Door Drip Edge Guard, And There Is No Need To Re-Drill. After Installation, It Is Recommended To Use Nail-Free Glue Or Glass Glue To Seal The Gap For Better Sealing Performance.
وصف
Extra-wide and extra-thick design for better protection against rain splashes.
Our ZEYUE brand drip caps are extra-wide, with a width of 5.12"/13cm, which is wider and thicker than other brands of overhead exterior door rain drip guards (other brands have a width of 2.5"/2.7"/2.8"), and more durable.
Sturdy material: Made of extra-thick anodized aluminum with a maximum thickness of 2.5mm, it can bring a more assured use experience without worrying about twisting and deformation.
Pre-drilled design: We have pre-set 6 screw holes on the top of the rain drip cap, and equipped with 6 screws and expansion bolts. You don't need to drill holes or buy extra screws. You can install it after unpacking, saving time and effort.
Installation suggestions: It can be cut according to the required length (cut with a hacksaw), and after installation, seal the wall joints with sealant to obtain a more perfect sealing effect (sealant is not included in the package).