Features:
-Traditional solution for burning chip needs: First disassemble the chip, then resold it after engraving. The operation is very troublesome and very easy to damage the chip.
-This SOP8 clip is a great solution to burn the chip without disassembling the chip, saving soldering time and making flash BIOS simpler and more efficient.

-Tips: Some chips are affected by peripheral circuits and cannot be clipped directly. Please check the location of the chip on the motherboard before purchasing.

Note for the test clip:
1. Some motherboards can cut the chip directly, but some chips are affected by peripheral circuits and cannot be used in this way. Check the location of the chip on the motherboard before buying!
2. The test clip can be used with many high power programmers. When a programmer with a protected function is encountered, the clip cannot be played at normal voltage. You need to add a voltage of 3.3V.
How to use: First hold the chip and add a voltage of 3.3V to the pin corresponding to the 8th pin of the chip. As a rule, the 3.3V power supply has two wires, the VCC is connected to the clip, and the other wire is grounded.
3. Do not press forcefully when tightening, first open the clip and clip it from the left and right sides of the chip.

Package contains:
1 x USB programmer CH341A.
1 x SOP8 SOIC8 Test Clip
1 x 8Pin to 8Pin Converter
2 x SOP8 SOP16 to 8Pin Converter
2 x 2.54mm 4 pin header