مميزات خاصة

With input overload protection, output short circuit protection.
Convert the mechanics and output quantity of the standard current and voltage.
Load cell transmitter precisely amplify the sensor output signal, convert mechanics and quantity into standard current and voltage signal output.
Load cell transmitter can be directly connected to the interface of the PLC single-chip upper computer terminal of the automatic control equipment or the computer network.
The internal high output device when used to accurately amplify the sensor sensor, internal voltage regulation, constant current flow, voltage conversion and voltage ratio, adaptation of the 'impedance, linear compensation, humidity compensation, etc.

وصف

Product Introduction1. Waterproof design and good sealing of enclosure and cable joint2. Internal precision and amplifying circuit3. Current and voltage output at the same time and free choice through terminal4. Connect to all kinds of strain gauge bridge-type load cell, such as weighing, tension, compression torque and so onTechnical Data1. Power Supply 24VDC (18-27Vdc)2. Max Power: 4W(when parallel connection load cell 4pcs of 350 and output 20mA)3. Wiring Mode: screw-type wiring terminal 4. Net Weight: 100g 5. Dimension: 115x58x33(mm) (LxWxH)6. Working Temperature Range: -10 to 507. Storage Temperate Range: -20 to 808. Humidity: 85%RH, no condensation9. Load Cell Sensitivity Range: 2.0mV/V10%10. Voltage Zero Adjustment Range: precision: 10%F.S., extension: 40%F.S.11. Voltage Full-scale Adjustment Range: 10% F.S.12. Current Zero Adjustment Range: 10% F.S.13. Current Full-scale Adjustment Range: 10% F.S. 14. Precision: better than 0.3% F.S.15. Temperature Drift: better than 100ppm16. Load Cell Excitation Voltage: 5Vdc5% (for load cell with excitation voltage 5-12V)5k20. Current Output Resistance:

مرحبًا،

بحث

Bolisila RW-ST01A خلية تحميل/مضخم قياس الضغط، مخرج إشارة مزدوج (0-5 فولت/10 فولت و4-20 مللي أمبير)(0-10 فولت و4-20 مللي أمبير)

مميزات خاصة

وصف

منتجات شبيهه