Erayco USLKG2.5N DIN Rail Mounted Ground Circuit Connection Terminal Block, 24-12 AWG, Screw Clamp (Pack of 20)

Specification:
Brand: Erayco
Type: USLKG2.5N
Material: Nylon PA66 Housing + High Tensile Steel + Nickel-plated Screws
Rated voltage: 600V.
Rated current: 20A.
Conductor Size: 24-12 AWG
Cross section, solid/soft wire: 0.2-4 mm² /0.2-2.5 mm²
Universal Mounting Foot
Large wire funnel entry
Housing thickness: 6.2mm
Installation Method: DIN Rail Mounted

Package Quantity: 20 Pieces

The Erayco USLKG2.5N is a DIN rail mounted screw clamp ground circuit terminal block with the housing molded in the internationally accepted colors of green and yellow to signify that this is a ground circuit connection device. The USLKG2.5N has a wire connection range of 24 to 12 AWG. The mounting foot is made of a high tensile steel and is clamped directly to the DIN rail providing a secure and reliable mechanical and electrical connection. When used at the end of a terminal block assembly the ground circuit terminal block can eliminate the need for an additional end clamp on the DIN rail.

Use ground blocks instead of grounding studs and wire lugs to terminate ground wires, saving installation and wiring time. Ground blocks clamp mechanically onto the DIN Rail by tightening the center mounting screw, making a reliable electrical connection between the cage clamp terminals and the DIN Rail. The rail serves as a busbar and automatically distributes ground

Potential to all other ground terminals on the same rail. Ground blocks can also be used as end stops, preventing other terminal blocks and components from moving laterally on the DIN Rail. They are supplied with a standard green/yellow housing for easy identification and accept standard marking tags.