(Set of 2) ATTENTION: Only used for the 3157 CANBUS LED turn signal lights bulbs that you still meet flickering/hyper flash. There are 2 types of 3157 resistors' harness, Please check stock OEM harness match the female connector, the installation guide NO. 4 picture and installation guide video to install correctly. Also please check stock housing to confirm the load resistor can fit into the housing before purchasing.
This 3157 LED resistors will NOT compatible with the CK/SRCK socket, plz make sure the stock socket is standard type before purchasing. Aluminum Shell; Excellent heat dissipation. One LED resistor is required for each bulb.
5W 100ohm 3157 LED resistors, not compatible with non-canbus LED bulbs. (for non-canbus LED turn signal lights bulbs, please install 50W 6ohm LED resistors) Solves the problem of LED bulbs flashing/flickering when installed. please make sure metal resistance not contact with plastic wire to prevent the plastic from melting.
Clears OBC and CAN-BUS warning errors on the dashboard when LED bulbs are installed. Used for: halogen/ incandescent front rear turn signal blinker light, back-up reverse light, brake stop tail light lamps upgrading led bulbs.
Alla Lighting 3057 3457 3157 CAN-Bus LED Resistors, *Type B* 5W 100Ohm Fix CANBus LED Bulbs Turn Signal Hyper Flash, Fast Blinking, Flickering, Bypass Wiring Harness
This listing features one pair ( 2 pieces) 3157 5W 100ohm LED resistors to avoid the CANBus LED bulbs' error code on the dash board or flicking on-off due to the CANBUS led bulbs are not compatible for many auto cars, trucks, SUVs, vans, etc., directly plug and play, easy installation.
Features:
--- Directly plug and play, easy installation,
--- Cancel Error Message cause by OBC (On-Board Computer) Check. Cancel Hyper Blink on LED Headlight
--- Permanently resolve the annoying LED turn signal light flickering problem
--- Includes 2 pieces 3157 5W 100ohm LED resistors per order.
Please note: Only compatible with CAN-Bus LED Turn signal lights bulbs. This 5W 100ohm 3157 LED resistors are not compatible with non-canbus LED bulbs. (for non-canbus LED turn signal lights bulbs, please install 50W 6ohm LED resistors) Solves the problem of LED bulbs flashing/flickering when installed. please make sure metal resistance not contact with plastic wire to prevent the plastic from melting.》