CAR BACKUP CAMERA, NO BLIND SPOT IN THE REAR, MORE PEACE OF MIND WHEN REVERSING
Product Attributes
Colors: Black
Sizes:
Back up Camera Size: 1.24*0.85 inch
License Plate Frame Size: 7.68*1.38 inch
Power Cable: 1 m / 39.37 inch
Video Cable: 6 m / 19.69 Ft
Back up Camera Cable: 23.22 inch
Weight: 7.94 oz
Material: Metal
Packaging: Video Cable*1, Power Cable*1, Product Manual*2, Pre-drilled Holder*1, License Plate Holder*1, Camera*1, Reversing Camera Cable*1 (Attached to Camera)
Product Parameters
Waterproof Grade: IP68
Resolution: 720P
Applicability: 12V Car or SUV
Wide Angle: 100 Degrees
Pre-purchase Notice
Attention, our license plate camera is only compatible with 12V cars and SUVs, please don't use it for 24V trucks/vans
Product Installation
1. Connect the connector on the camera cable to the connector on the video cable, and connect the other connector on the camera cable to the power cable (black wire to negative terminal, red wire to positive terminal)
2. Connect the other connector of the video cable to the video signal connector on the monitor
3. When the power is on, the car camera can start to work mode
(Please refer to the picture for detailed wiring method, and tear off the film on the surface of the camera before use)
Bracket Installation
Align the bracket to the vehicle mounting position and tighten it with screws (please bring your own screws, they are not provided in the package)