Condition: New

Brand: Jetuplusllc

Part Type: Harness Adapter

JDM HVAC Panel wiring adapter for Subaru Legacy and Outback

In Legacy/Outback models with automatic climate controls, HVAC controls are integrated with the factory radio. Removing the radio means you lose your factory HVAC controls so customers will use the JDM "A/V Panel Set" to provide a replacement HVAC control panel, along with a mounting kit to install an aftermarket double-DIN radio. However, the JDM HVAC panel requires Illumination and +12V Switched signals that are not present on the factory "i88" harness in US and for Canadian Legacy/Outback models.

This adapter is used in combination with the JDM AV Panel to retain HVAC control when installing an aftermarket Double DIN headunit for Subaru Legacy or Outback. The JDM panel requires the following additional signals that are not connected in the OEM harness:

Illumination (-)

Illumination (+)

+12V Switched

This adapter is a plug-and-play solution to add these signals to the connector on your vehicle's wiring without cutting factory wire. The parts you'll need are the i88 adapter, which connects to the back of the JDM AC Panel and the vehicles i88 connector, and the 14-pin Subaru Install harness with the added Illumination (-) pin.

Fitment:

For Subaru 2005-2009 Legacy/Outback