Turn heads and drop jaws with this 5" lift kit for your truck that gives you clearance for tires up to 35". This kit has everything you need to raise and level your 2011 - 2019 Chevy/GM 2500HD /3500HD truck. If you're going to do it, do it right. While this kit doesn't come with shocks, Nitro Series or FOX 2.0 Adventure Series upgrades are available.

Specs:
Front Lift Height: 5"
Rear Lift Height: 3"
Material: Steel
Front Lift Method: Torsion Bar Drop
Rear Lift Method: Cast Blocks
Lift Type: Lift Kit
Wheel Size: 17 x 9
Back Spacing: 4.75"
Max Tire Size: 35 x 12.5
Wheel Size 2: 20 x 9
Back Spacing 2: 6"
Max Tire Size 2: 285 x 65
Wheel Size 3: 20 x 9
Back Spacing 3: 6"
Max Tire Size 3: 35 x 12.5
Finish: Powdercoat
Cutting Required: Yes
Accommodates Factory Wheels: See Notes
Welding Required: No

IMPORTANT NOTES: For 2015-2018 models, 20" wheels cannot be reinstalled due to GM changing the wheel thickness, resulting in smaller wheel ID. While this kit will fit RWD models, the front differential-related parts included will not be utilized. Installation requires frame bracket modifications, and additional modifications are necessary as outlined in the installation instructions. The optional steering stabilizer (PN# 7103) is compatible only with vehicles equipped with a factory-installed steering stabilizer. Stock 17" or 18" wheels cannot be reinstalled, and the same applies to stock 20" wheels for 2015-2018 models. For vehicles with a two-piece rear driveshaft, consider adding a carrier bearing drop kit to reduce post-lift driveline angles and mitigate driveshaft vibration. With 20" wheels, a backspacing of 5"-6" is recommended. While rare, some vehicles regularly used in 4WD on the highway may experience minor front driveline vibration, in which case replacing the front driveshaft with a dual cardan style driveshaft is recommended.