Diodes Rectifiers
1PCS concave ZP500A rectifier diode 2CZ500A 1600V flat plate rectifier tube
Model: ZP200A (2CZ200A)
Default withstand voltage: 1600V
Dimensions: Diameter: 64 mm Thickness: 17.5mm
Kind tips:
1: Selection instructions
The current used when forming a single-phase rectifier bridge is within 70%, and the current used when forming a three-phase rectifier bridge is within 2: Installation precautions
1. To make the thyristor trigger conductive, the trigger current and trigger voltage must be more than three times greater than the trigger current and voltage indicated on the certificate.
2. When using an air-cooled radiator for a flat panel, first rub the surface with fine sandpaper and then clean it with alcohol.
3. When using a water-cooled radiator for a flat panel, first use an air pump to connect the water inlet on one side to introduce air pressure, and clear excess blockages to ensure that the water output is sufficient before use.