7 Inch Slim Fan Push Pull Electric Radiator Cooling Fans 800+ CFM Thermostat 12V 80W Motor Universal High Performance Cooling Fan Mount Kit Black
Specifiction:
Power Connector Type: 3-Pin
Voltage: 12 Volts
Wattage: 80 Watts
Cooling Method: Air
Compatible Devices: Radiator
Material: Plastic
Noise Level: 30 dB
Maximum Rotational Speed: 2200 RPM
Package includes:
1 x Electric Slim Fans
4 x Mounting Spring
4 x Mounting Rods
4 x Mounting Clips
4 x Mounting Feet
8 x Foam Pads
Installation steps:
1. Open the hood of the car and remove the intake pipe above the cooling fan, then remove the cooling fan.
2. The cooling fan and the air conditioning fan are located above the fan frame, with a total of four corners, one screw at each corner. Use a professional tool to unscrew the four screws. When the screws are all unscrewed, we can remove the cooling fan from the car.
3. Install the Electric Radiator Cooling Fan correctly on the new fan frame, and tighten and secure the four screws.
4. Start the engine test and the fan can run normally. After checking the error, install the intake pipe to the correct position.
5. Tighten the screws of the intake pipe, close the hood of the car, and test to ensure the new radiator fan is working properly.