استبدال عصا قياس زيت المحرك لـ CJ5Z-6750-A، عصا غمس لفحص سائل الزيت، مقياس مؤشر مستوى سائل المحرك، متوافق مع Ford Edge Escape Explorer Focus Fusion Taurus
Replacement Part Number: The dip stick for checking oil is a replacement for the old dipstick of OEM#CJ5Z-6750-A, CJ5E6750AB, CJ5Z6750A, with a total length of 23.31 inches and an insertion length of 20.55 inches
Compatible with: This engine oil dip stick is compatible with Ford Edge 2013-2018, Escape 2013-2019, Explorer 2013-2019, Focus 2013-2018, Fusion 2013-2020, Taurus 2013-2019, Lincoln Continental 2017-2019, MKC 2015-2019, MKT 2013-2016, MKX 2013-2018
O-Ring Design: Engine oil dipstick is equipped with a yellow O-ring pull ring on the top, which is easy to operate, easy to grasp and prevent the dipstick from loosening. The rubber seal on the top prevents debris from entering the engine oil tank
Material: This engine oil dipstick are closely inspected to meet the strictes t quality standards to ensure a long lifespan. In order to obtain an accurate reading, it needs to be wiped clean after being pulled out before it can be inserted again
Easy to Use: Insert the tool into the dipstick tube until it bottoms out. Remove and check the oil level, do not leave the tool in the dipstick tube after checking. The metal tip is clearly marked to ensure clear and easy to read oil level readings
وصف
Replace Part Number:
CJ5Z-6750-A
CJ5E6750AB
CJ5Z6750A
Fitment:
Ford Edge 2013-2018
Escape 2013-2019
Explorer 2013-2019
Focus 2013-2018
Fusion 2013-2020
Taurus 2013-2019
Lincoln Continental 2017-2019
MKC 2015-2019
MKT 2013-2016
MKX 2013-2018
MKZ 2013-2020
The oil dipstick stem has clear scales for easy reading of the oil level, helping you easily check the oil level and oil quality, making the oil dipstick easy to find under the hood.
The dipstick's O-ring seal prevents debris from entering the engine oil tank and makes the dipstick easy to find under the hood.
The oil level must be checked after the vehicle cools down. Insert the dipstick tube until the bottom of the tool. After pulling out the dipstick to read the value, you need to wipe it clean with a paper towel and then insert it again for an accurate reading.
Do not leave the tool in the dipstick tube after use.