-Cable luber for motorcycles, scooters, mopeds and bicycles
- Used to inject lubricant into cable housing
- Clamps over housing and wire allowing an aerosol can to be connected
- Once the lubricating oil is used up from the remote end, the cable will be lubricated;
- Use this handy tool to make it easier to spray cable lube in your cables.
وصف
Instructions:
1,Hold and cover cable firmly by special rubber and single-screw tighten vise design.
2,Injecting the lubricant fluid into the cable housing very easily. Just put the straw of the lubricant into the injection hole and press the lubricant after tighten up the screws
3,Gently press and release the lubricant few times, the fluid will penetrate the whole cable and that will make the clutch action smoothly
4,The metal cable will rust if it is not lubed. So always lubricate metal cables on your regular maintenance
5,WINTOWIN cable lubricator is a must-have tool to keep your cable lubricated. Can efficiently apply lubricator to the cable