Car Headlight Cover Transparent Plastic Headlamp Lens Transparent Lampshade Shell Replace The Original Glass
Product name: headlight lampshade
Material: PC (polycarbon) new
Applicable: Replacement of car headlight glass with yellowing, aging and damage.
Process: high temperature injection molding, PC hard
Installation Notes:
Tools: A large basin, a screwdriver, an absorbent cloth, a pair of gloves, a pair of scissors
Operation method:
1. Remove the headlights from the car ( first needs to be removed the bumper . When removing the bumper, use a cardboard box on the ground to avoid scratching the paint on the bumper)
2. After removing the headlight, put the boiling water into the basin, then press the lampshade of the headlight completely into the boiling water for 5 minutes, the glue will soften,
3. Use an absorbent cloth to quickly dry the water droplets on the surface of the lampshade and the rear case. Then use a screwdriver to separate the lampshade from the rear case
4. Clean up the glue in the glue tank of the rear case as much as possible and wear gloves. Remove the trim frame from the lampshade and install the new lampshade.
5. Spread the snake glue evenly in the glue tank of the rear shell of the headlight, compact it by hand, and then heat it with a hot air gun or a hair dryer. When the whole snake glue is heated evenly, then close the new lampshade according to the original lampshade position. compaction
6. Installation is complete
Reminder: Due to the complicated installation steps, it is best to go to a professional store for installation
Suitable For Lamp : Headlights
Welcome to my store! Thank you very much for choosing our store for shopping! We will continue to work hard to provide you with better quality products and services. Your support is our greatest motivation! If you have any questions or need assistance, please feel free to contact our customer service and we will be happy to an