Specifications:
Model No.: FX1N-20mr
Operating Voltage: DC24(V)
Wide power supply voltage: 10-28 V DC
Baud speed: 9600
Programming software: for GX-Developer, for GX-work2.
Size: Approx. 86 x 73 x 20 mm / 3.4 x 2.9 x 0.7 inches
Weight: 120G

Package Included:
1 x PLC board

Module function:
Some of the common features are shown below:
Turn on the power supply, the relay 1 closes for N seconds, and then disconnect the relay 2 for N seconds.
When the power supply is turned on, the relay 1 is turned off after N seconds, and then the relay 2 is closed for N seconds, and then turned off.
It can be connected to the NPN sensor signal, programming the sensor signal, to achieve arbitrary control of the relay.
When the signal 1 is activated, the relay 1 is controlled, and when the signal 2 is activated, the relay 2 is controlled.
Turn on the power supply, the control motor is rotating N seconds, and then inverts N seconds, followed by the cycle.
When the signal 1 has a signal, the motor is controlled to rotate; when the signal 2 has a signal, the motor is reversed.
These are just a few examples, modules can accomplish much more than these functions
High speed pulse input compatible with C235, C251 and FX1N.
Output relay output 1A, rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc.