مميزات خاصة

Reduce Sliding and Shaking: Using our car cup holder inserts with arc leaf design, the leaf can play a limiting effect when contacting the surface of the cup, increasing the friction, even when encountering bumps on the road or harsh braking, it can also effectively avoid the cup sliding
Soft Silicone: The use of silicone as the main material of the car cupholder insert, its good flexibility fundamentally avoids the problem of scratches when in contact with the cup, even if the cup is a smooth lacquer, it will not be scratched by the limiter marks
Warm Tips: Our cup holder insert for car is mainly used for round cup slots, for cup holders with lychee pattern on the surface or irregular shaped cup holders, it may not be able to realize the ideal adhesion effect. It needs to be installed on the inside of the cup holder in the upper position
You Will Receive: Package contains silicone cup holder insert for car*6, wet/dry cloth*1, instruction manual*1, the back of the adhesive backing area has been increased in size to 2.33*0.48 inch, to reduce the possibility of peeling off in the long term use
Installation Steps: 1. Wipe the mounting position in advance. 2. Peel off the protective film from the adhesive backing of the auto cup holder insert. 3. Stick the limiters to the mounting position. Using a hair dryer to warm up the adhesive backing will improve adhesion

وصف

USE OUR CAR CUP HOLDER INSERT TO AVOID CUPS SHAKING AND FALLING OVER

Product Attributes
Colors: Black
Sizes:
Total Size: 2.28*0.48*0.47 inch
Backing Area: 2.33*0.48 inch
Arc Length: 2.33 inch / Side Thickness (with Adhesive Backing): 0.13 inch
Weight: 0.61 oz
Material: Silicone
Packaging: Car Cup Holder Insert*6, Manual*1, Wet/Dry Cloth*1

Product Functions & Features
1. Note that our cup holder inserts for car mainly fit round cup holders, if your cup holder has a lychee texture on the surface or is irregularly shaped, we do not recommend you to use this product
2. Our cup holder insert for car is a curved leaf design, which can form a clever limiting effect with the curvature of the leaf, avoiding the cup from shaking and sliding
3. Silicone is the main material of cupholder insert for car, when the insert is in contact with the cup, it will not cause hard friction like hard materials, avoiding scratches

Product Installation
1. Wipe the mounting position in advance
2. Peel off the protective film from the adhesive backing of the auto cup holder insert
3. Stick the limiters to the mounting position. Using a hair dryer to warm up the adhesive backing will improve adhesion

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه