Say goodbye to sticking troubles and achieve perfect mould release every time.
Our professional silicone release spray is an indispensable "invisible assistant" in your studio, ensuring every piece of your work comes out effortlessly and flawlessly. Our specially optimized formula perfectly replicates every angle and curve of your mould, ensuring the most detailed details are perfectly reproduced. Applying it in just one second significantly improves mould release success rates and workflow efficiency, allowing you to focus more time and energy on your design and creation while effectively protecting your expensive moulds from damage.
Instructions
1. Shake the bottle thoroughly before use.
2. Spray a thin, even layer onto a clean, dry mould, approximately 15-20 cm away.
3. Allow to stand for 1-2 minutes for the solvent to evaporate completely, leaving an invisible release film.
4. Add your material and proceed with your normal production process.
5. Once the material has fully cured, you can easily release it from the mould.
Precautions
1. Use in a well-ventilated area.
2. Store in a cool, dark place.
3. For first-time use, it is recommended to test the demoulding effect on a small, inconspicuous area.