Application: ▼

For Subaru Selected with CVT TR580 / TR690 Transmission.
For Subaru 16-19 Crosstrek .
For Subaru 16-18 Forester H4 122 2.0L (1998cc).
For Subaru 14-23 Forester H4 152 2.5L (2498cc).
For Subaru 12-23 Impreza H4 2.0L (1995cc).
For Subaru 12-16 Impreza H4 122 2.0L (1995cc).
For Subaru 15-20 WRX H4 122 2.0L (1998cc).
For Subaru 13-13 Legacy H4 2.5L (2458cc).
For Subaru 13-19 Legacy H4 152 2.5L (2498cc).
For Subaru 13-19 Legacy H6 3.6L (3630cc).
For Subaru 13-15 Outback H4 2.5L (2458cc).
For Subaru 13-19 Outback H4 152 2.5L (2498cc).
For Subaru 13-19 Outback H6 3.6L (3630cc).
Only Fit for Black Torque Converter Solenoid 3.2-3.7Ω!!!
Vehicle compatibility charts are for REFERENCE ONLY. Check product type and size to match your needs.
Lock-Up Solenoid OE Number: ▼

31706AA030, 31825AA050, 31825AA051, 31825AA052.
Reference Control Valve Body OE Number: 31706AA140, 31706AA141, 31706AA142.
Installation Steps: ▼

1. Remove the valve body from the vehicle.
2. Disconnect the electrical connection line to remove the faulty OE solenoid valve.
3. Remove and discard two valve body assembly O-rings.
4. Install the new solenoid in the position where it was just removed (apply a light coat of oil to the replacement solenoid's O-ring).
5. Connect the wires to the new solenoid.
Error Code: ▼

P2762: Torque Converter Clutch Pressure Control Solenoid Control Circuit Range/Performance
P2763: Torque Converter Clutch Pressure Control Solenoid Control Circuit High
P2764: Torque Converter Clutch Pressure Control Solenoid Control Circuit Low
Reasons for the malfunction of the Lock-up Solenoid Torque Converter: ▼

Seal wear
Damaged torque converter bearings
Defective clutch discs
Clutch solenoid valve malfunction
Bad Torque Converter Solenoid Symptoms: ▼

Rough idling
Transmission slipping
Transmission oil temperature overheating
Check that the engine light is on
Abnormal gear shifting (always stuck in neutral, difficult to downshift)
Abnormal vehicle bumps during acceleration or deceleration