HGM180HC Auto Start Stop Engine Control Module Diesel Genset Controller Generator Accessories
Product Description
The HGM180HC generator set controller is a self-starting module. Three working states can be selected by the electric lock. The generator set can be started manually by touching the button on the panel, or the generator set can be automatically started by remote signal input, and the fault can be detected (Low oil pressure, high water temperature/cylinder temperature, external alarm, overspeed) automatically cut off the fuel relay and shut down the electromagnet to be electrified. The panel LED indicates the fault status and provides a true and effective fault alarm signal.
Performance and characteristics:
Wide DC power input range
With low oil pressure, high water temperature/cylinder temperature, overspeed protection and indication
With charging failure warning indication, no shutdown
An additional external input alarm shutdown signal
The speed signal is taken from the generating frequency
LED display various alarm status
display with operating hours meter
With fuel output, start output, preheat output, shutdown output, public alarm/idling output functions, all of which are relay output
With idle speed control function, idle delay time is programmable
Preheating delay time is programmable
The conditions for successful start can be oil pressure + power generation ( default), or only power generation
When the dial switch is set to idling/high-speed valid, the output port can be configured as idling/high-speed output, otherwise it is public alarm output.
Modular structure design, ABS plastic shell, embedded installation method, compact structure, small size, advanced single-chip control, stable performance and convenient operation
The main technical parameters:
DC power supply: 8-35V
Power generation input: AC15-300V(+20%) 50 or 60Hz programmable
Overspeed threshold: 114% of rated frequency
Starter separation: generator voltage 15VAC and frequency 15Hz
Charging failure voltage: less than 3V
Idle time: the default is 10 seconds
Remote power-on input judgment time: 2 seconds
Remote shutdown input judgment time: 10 seconds
5 output ports: 1A current, DC power supply B+ relay output
4 switch input ports: connect to B- effective
Hour meter: maximum display time 99999.9 hours
Working temperature: -30-+70
Power consumption: standby (12V: 0.12W, 24V: 0.24W), normal operation (12V: 0.5W, 24V: 1W)
Appearance size: 84x72x35mm
Weight: 0.2Kg
TERMINALS FUNCTION
Terminal 1 (B-): Connected to plant battery negative.
Terminal 2 (B+): Connected to plant battery positive.
Terminal 3 (Fuel Output): Fuel Output (B+), Connected to fuel relay.
Terminal 4 (Start Output): Start Output (B+), Connected to start relay.
Terminal 5 (Pre-heat Output): Pre-heat Output (B+).
Terminal 6 (Aux. Shutdown Input): auxiliary shutdown alarm input, connect to B- active.
Terminal 8 (Low Oil Pressure Input): Low Oil Pressure Input port, connect Bactive.
Terminal 9 (High Engine Temp input): High water/cylinder temperature input port, connect to B- active.
Terminal 10 (L), 11(N): Connect to AC voltage signal for detecting crank disconnect and over speed protection.
Terminal 12 (Config. Output): Config. Output (B+), can be set as idle/high speed output or common alarm via dial switch of the controller.
Terminal 13 (Stop Output): Energize to stop (ETS) (B+).
Terminal 14 (Remote Start Input): Remote start input port,connect to B- active.
==========
Model Number : HGM180HC
Product Name : HGM180HC
Keyword : Diesel Generator Controller
Usage : Auto Start Control Panel