مميزات خاصة

High Quality Material: Made of quality silicone material, with excellent wear resistance, high temperature resistance. The softness and elasticity of the silicone allows the CV boot to fit tightly and not loosen or fall off due to the vibration of the vehicle
Specifications: Our boot measures 4.72 inch in length and fits 2.41 inch / 2.81 inch / 3.43 inch calibers. You can put it into the axle by stretching it and using the mounting cone tool, then just cut the excess and secure it with clamps and ties
You Will Receive: 2 CV joint boot, 4 stainless steel clamps and 6 cable ties. Suitable for most vehicles. Installation is simple, you simply remove the old or worn CV boot, and then use the mounting cone to put the new CV axle boot into the axle
Great Protection: The CV axle boot acts like a sturdy shield, providing full protection. It can effectively prevent the intrusion of dust, sand, water and other impurities, and at the same time, avoid the overflow of grease from the ball cage
Car essentials: If your CV joint boot usually makes a clicking sound when turning, it is possible that it is broken, which can lead to grease oozing out, we recommend that you check and replace it in time, it is an essential accessory for your car

وصف

Specifications:
Material: Silicone
Weight: 8.4 oz
Sizes: 4.72x3.54x3.54 inch
Colors: Black
Packaging: 2 x CV Boots + 2 x Large Stainless Steel Clamp + 2 x Small Stainless Steel Clamp +6 x Nylon Cable Ties

Installation Procedure:
-Apply Grease: Apply an appropriate amount of grease to the axle. Grease reduces friction, minimizes wear, aids heat dissipation, and avoids rust. Keep even application—avoid too much or too little.
-Install Boot: Use a conical installation tool to carefully slide the new CV boot onto the axle, keeping full coverage. Pay attention to the boot's orientation—the larger end typically faces outward, and the smaller end faces inward.
- Secure Axle Boot: Use the included clamps or cable ties to firmly secure the boot to the car axle. Keep proper installation and tightening. Avoid over-tightening, which may loosen the boot, cause it to detach, or damage the axle.

Strongly Recommended:
Before placing an order, please be sure to measure and check the size and caliber data of the product you need, to avoid mismatch after purchase (please allow a slight deviation in manual measurement data)

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه