●Features
-Humanized design of pressing wheel and creasing pressure, the creasing position can be adjusted arbitrarily more conveniently.
- The shaft is an Internatonal standard, easy topurchase, low cost
-Double positioning baffles more precise easy to use.

●Specification
Name: Electric Cresing Machine
Power supply: 220V/50HZ
Creasing method: round creasing technology, longitudinal creasing, unlimited length
Cutting method: dotted line cutting
Paper pressing width: 460mm
Creasing width: coarse/fine
Paper pressing wheel: 2 sets
Creasing wheel: 2 sets
Dotted line knife: 1 set
Slitting knife: 1 set
Outer box size: 540x370x230mm
Weight: 11kg

●How to Use
1. Plug in the correct power supply, turn it on and see if the machine is running properly. The socket comes with a spare fuse.
2. Select different creasing lines as required. Use the tool to adjust the position. The center of the creasing wheel should be right in the center of the creasing groove.
3. Check the scale according to the paper size and indentation position.
4. Adjust the left and right side gauges.
5. Place the trial paper. Turn on the power and push the paper over the creasing wheel. Adjust the pressure as required. Pay attention to the thickness of the paper. Too much pressure affects the life of the motor.
6. When all is ready, push the paper into the platen to start working.
7. Press the dotted line to replace the corresponding indentation wheel or knife holder installed. Adjust certain pressure.

●Package Included
1x Electric Creasing Machine
1x Power Cord