Item Type: Oil Temperature Gauge
Material: Stainless Steel 316L Bezel + Anti-Fog Glass
Color: Black Dial Silver Bezel
Functions: Display current Oil Temp
Operation Mode: Stepper Motor
Installation Diameter: Approx. 52mm/2in
Working Volt: 9-32V(12V/24V)
Signal: 361-19ohm
Range: 50-150℃
Operating Temperature: -30℃-+75℃
Storage Temperature: -40℃-+85℃
Protection Class: IP67, can work underwater 1m position
Backlight: 8 Colors: red, green, blue, white, yellow, olivine, orange, purple, totally 8 kinds different backlight color,it will change automatically every 1 minute,or you can fix only one color that you like through press the gauge back ''set'' button
How to Use: Fix the meter on the instrument panel and connect the power cord
Wiring:
The red wire is connected to the positive pole
The blue wire is connected to the negative pole
The black wire is connected to the sensor
The orange wire is connected to backlight

Installation Notes:
1. Cut a hole 52mm in diameter in the panel (your engine room panel and instrument panel) and insert the meter into the hole corresponding to the panel marked with a and make a small notch in this position to ensure at least 52mm (2in) instrument panel on the back of the instrument.
2. After installing the instrument into the panel, screw down with the fixing ring
3. Connect the wires, the instrument shell is directly connected to the 12/24V power supply
4. Insert the wire harness and fix it firmly on the table

Package List：
1 x Oil Temperature Gauge
1 x Power Wire Harness
1 x Manual