TCE 2-Post Heavy Duty Car Lift is one of most affortable overhead car lift (auto hoist) with 10000 LB capacity. Heavy duty design Overall height: 3588mm(141.3in) Overall width: 3411mm(134.3in) Maximum lift height with truck adapters: 2015mm (79.3in) Maximum lift height without truck adapters: 1915mm (75.4in) Minimum height of arm top: 99mm(3.9in) Column steel thickness: 5mm(0.2in) Carriage steel thickness: 6mm(0.23in) Carriage yoke thickness: 14mm(0.55in) Arm steel thickness: 6mm(0.23in) Base plate steel thickness: 14mm(0.55in) Driving mode: dual hydraulic cylinders, chain drive Voltage: 220V 60Hz Lifting capacity: 4.5t (10000LB) Combo (symmetrical and asymmetrical) arm assembly Safety mechanism: Double point safety lock release Automatic arm lock restraints Relief valve built in power pump to prevent overloading Door guards (protection rubber) Heavy duty9.3mm(0.37in) diameter cable and 118mm(4.65in) pulley that reduce high stress on synchronization process and increase cable life Ultra-high molecular self-lubricating nylon slider that ensures carriage smooth moving up and down Control system: Lifting operation by pressing "UP" button on motor Manual lowering operation by pressing lever Relief valve built in power pump to prevent overloading 100mm (4") high truck adapter set (4 pieces) included Carriage to carriage width (drive-through clearance): 2250mm (88.58in) Column to column width: 2780mm (109.45in) Column cross section: 280mm x 180mm (11in x 7in) Time to full rise: 50 sec Motor: 3 HP Shipping weight: 658kg(1,450 LB); Shipping package size: L:2910mm x W:470mm x H:1019mm (115in x 19in x 40in)