We have professional service, if you have any questions when purchasing Digital Gear Indicator , please contact us in time. Please confirm if the Indicator Meter Display fits your motorcycle before placing an order, to make sure you get what you want and bring you a comfortable online shopping experience.
Fitment:
For SU&ZUKI GSX1300R Hayabusa 1999-2007
Features:
Gear indicatior Light Color: Red
Color of gear indicator bracket: black red green blue
1-6 Level Gear display
Locate the Speed Sensor connector:
The Speed Sensor is usually mounted on the front sprocket cover, and the 3-pole black speed sensor coupler is situated 20-40 cm (8"-16") away from sensor.
The connector is accessible by raising the fuel tank, removing the or a side fairing
Confirmation:
1. Separate the Speed Sensor connector (you might need to use a small flathead screwdriver to get the connector apart).
2. After separating the Speed Sensor connector, in both the male and female 3-pole GFYSHIP harness connectors. Make sure the connectors are fully seated.
3. Find the wire that comes from the Signal generator (Pickup coil / CKP sensor).
If in doubt, check the bike's Service Manual or ask your dealer.
4. Connect the Green wire to this wire, using the Red wire tap connector supplied.(The green wire is connected to the crankshaft sensor signal line)
Setup:
You need to setup the module after installation. When ignition is turned on, the display counts backwards (6 to 1) indicating that the memory is clear.
- Raise the rear wheel off the ground by using a stand, and start the engine in Neutral.
-When the gear indicator screen displays "L", it means to start learning; Slowly accelerate through the throttle handle,
-When the gear indicator displays "1", please select the first gear,The display is blinking faster while the unit is learning the gear,release the clutch, and keep the RPM above idle