This 8 Ohm, 25 Watt resistance can be connected across the turn signal bulbs to simulate the load of a regular filament bulb.
This will solve LED related turn signal problems such as hyper flashing, no flashing or burnt out bulb indications.
One resistance is required for each turn signal bulb.
Resistance for LED light, 25W 8ohm resistance, wired resistor , 2 X resistance Can be used with LED turn light of cars, bikes

Features:

Beautiful golden aluminium housing

25 watt ,Pre-wired

Dimensions: Approx. 2.65(L) X 2.7(W) X 1.4(H)cm (1.04 X 1.06 X 0.55 inch)

Correct too-fast flashing

Stop bulbs blowing

Fitment:

This light is universal fit and it is not specific design for any motorcycle
All Years & Models

All Years & Models

Kawasaki All Years & Models

Suzuki All Years & Models

Ducati All Years & Models

KTM All Years & Models

All Years & Models

NOTE:
Resistance for LED light, 25W 8ohm resistance, wired resistor,

2 X resistance Can be used with LED turn light of cars, bikes

Simply connect the load resistor to the 2 wires (signal and ground) leading to the signal.

Polarity is not important.

If your signal has 3 wires, then omit the running light wire as this is unaffected when the turn signal is activated.

Resistor will get HOT when signal is activated.

Do not mount directly to plastic surfaces.

مرحبًا،

بحث