Dillon Precision Case Lubricant is a fast, efficient, and mess-free solution for preparing brass cases for resizing. Designed for serious reloaders who value consistency and equipment longevity, this lanolin-based, non-aerosol spray offers professional-grade performance in an easy-to-use 8 oz bottle. Unlike grease pads or waxes that are messy and slow to apply, Dillon's case lube uses a fine-mist spray that lets you prep dozens or even hundreds of cases in seconds. Just lay your cases out in a loading tray or box, spray with one or two quick passes, and wait a few minutes for the formula to settle. The alcohol-based carrier evaporates rapidly, leaving a uniform layer of lanolin on each case—ready for smooth, low-resistance sizing in your reloading machine. This formula was developed to reduce the risk of stuck or damaged cases, especially when working with bottleneck rifle brass or bulk reloads. The lubricant helps prevent unnecessary wear on your machine, sizing dies, shellplate, and other parts, improving the efficiency and lifespan of your reloading equipment. Whether you're resizing .223, 9mm, .308, or large-caliber rifle cases, this lube delivers the consistent performance serious reloaders demand. Please note: The lubricant does leave a residue on the brass, as intended. Cases should be cleaned before final loading to remove the lanolin layer and ensure powder and seating remain consistent. Directions for use: Shake well. Lay out brass cases in a single layer and spray lightly with one or two even passes. Allow the alcohol carrier to evaporate completely (typically within minutes). Lubricated cases are then ready for resizing. After resizing, clean brass in your preferred case cleaner before loading. Trusted by reloaders for 50 years, Dillon Precision continues to set the standard for reloading excellence. This case lubricant is a simple, high-performance upgrade that helps keep your reloading process running smooth and your results consistent.