Operation:
1.Connect the antenna cable to the left F Female and the battery pack cable to the right F Female. Remove any external amplifier* that may be connected to the antenna.
2.Adjust the antenna to the position by watching the meter's reading. Higher up the scale gives a better signal. If the finder's reading becomes full scale, adjust the level control knob to reduce the reading to around 5 (Turning the knob clockwise will decrease the reading), continue to move the antenna until you have the highest possible meter reading.
3.Remove the finder and replace any amplifier that was disconnected.

Important Note:
-If your antenna has an internal amplifer, (eg: 01MM-SQ01), it should be powered by an external power ply via a DC power inserter. Make sure the power inserter is positioned between the finder and the antenna.

Specifications:
Color: blue
Material: plastic
Frequency : 170-860
Input level : 65-95dB
Impedance: 75Ω
Insertion Loss: ≤5.0dB
Power ply: 9-12V DC
Item Size: Approx. 127 * 63 * 35 mm / 5 * 2.48 * 1.38in
Item Weight: Approx. 90g / 3.2oz
Package Size: Approx. 18.6 * 14.1 * 4.3cm / 7.32 * 5.55 * 1.69in
Package Weight: Approx. 197g / 6.97oz

Package List:
1 * Satellite Finder
1 * English User Manual
1 * Battery Holder
1 * Power Cable