1. [MICROPROCESSOR CONTROL] Ensures reliable and accurate satellite data detection.
2. [SENSITIVE DETECTION] Detects weak signals and easily attenuates strong signals.
3. [LCD GRAPHIC DISPLAY] Shows measurement parameters with LED backlighting.
4. [MULTIFUNCTIONAL] Displays via buzzer and signal strength on LCD display.
5. [WIDE APPLICATION] Suitable for astronomical observation, broadcasting work, and more.

Spec:
Item Type: Satellite Finder meter
Material: ABS
Frequency Range: 950-2150MHz
Power Supply Voltage: 13-18V DC
Input Level Range: -40dBm-10dBm
Operating Temperature: 0-40°C
Impedance: 75 ohms

How to Use:
1. Turn on the satellite , the satellite finder will automatically turn on.
2. Set the antenna to the correct azimuth and elevation angles (related information should be provided with the satellite dish).
3. Adjust the knob until the signal strength shows 0% (threshold point).
4. Slowly move the antenna's azimuth and elevation angles to the signal. The higher the number, the better the signal. If the reading reaches full scale, you can adjust the 'ATT' to lower the input signal. Continue moving the antenna until you get the highest meter reading and the highest possible beeping .
5. Disconnect the wire and readings, then reconnect the LNB or LNBF with the .

packing list:
1 x Satellite Finder Meter
1 x Manual